[4枚1セット] skoko Tesla Model Y/Model 3 ドアハンドル&アラウンドスクラッチガード PPFフィルム ステッカー ラップ

Easy to install, perfect to protect handle from any scratches

This install is ideal if you get the PPF liquid gel on Amazon. It’s relatively inexpensive. Most gel brands will work. If you only use water, this install will be a nightmare since the water is less forgiving when it comes to mistakes and realignment. The gel will make the install a lot smoother….!

Has some marks but next time I buy will do different

You CAN NOT get the Bible’s out so don’t waste your money ! This is horrible !

I installed this on a 2021 model 3 performance. The door pieces are cut about an eight of an inch off, so they don't quite make it to the rounded portion. The paint is exposed in that section and will get scratched as people use the handle.

I have kids and a wife that like to destroy things, worth the money to protect the things I love. Easy to apply, take your time and prep the area before applying

Very easy to install, I did make a little bit of tack solution (70% iso + water) to tack down a corner to make it easier to squeegee out the excess slip solution. Can barely notice it once installed and survived a rain storm without bubbling like others have mentioned.

I did let it dry a few days before exposing it to the elements. The door handle film is a bit hard to install as it is a small slim piece and tends to slip around unless you tack down a corner. Otherwise it may accidentally slip into the door handle spot and get contaminated/ruined. It does have an added benefit in making the flat black door handle a bit glossier.

I recommend installing the handle piece first before the larger surrounding piece. And squeegee away from the handle once you move onto the larger piece to prevent accidentally lifting the handle piece. If you install the surrounding piece first, you will have to squeegee towards that large piece when working on the handle piece, causing the larger piece's edge to lift before it has a chance to fully adhere.

Both the passenger side came damaged and did not adhere correctly. Had to take them off.

The quality of the PPF is immaculate and thickness of the material is just about right. Just make sure not to lift after drying out or you'll get stricks. When you move ppf around with bubble solution, check if it's lining up perfectly because there is no going back after drying out.

These looks really good. You have to get really close to even tell they are there. I just hope they last

This scratch guard PPF film is designed to protect the areas around the door handles from scratches and other types of damage. The film is made from a high-quality material. Before the installation, please follow the installation guideline, otherwise you may have the hard time to install those film perfectly. Once you read the guideline, the scratch guard PPF film is much easy to install, and it adheres securely to the surface of my car. It provides a durable barrier that can protect my Tesla from scratches. Overall, the Skoko scratch guard PPF film is a both high-quality product that can help to protect my Model Y and keep it looking great. If you're looking for a way to add an extra layer of protection to your Tesla Model 3 or Model Y, the Skoko product is definitely worth to consider.

I had the front of my Tesla done with PPF professionally and thought I'd add some extra protection at the door handles. The Skoko PPF went on easily and has bonded nicely. If you are familiar with PPF there will always be an edge, you can see it in the picture. It's easy to apply the PPF simply clean the area, add a few drops of soap to the water bottle, I use Baby Shampoo, it's recommended among the pros. Also, if your doors have been waxed use a diluted water:alcohol, 3:1 to remove the wax. When you are ready to apply, I suggest spraying the door AND the backing of the PPF with the soapy solution. Spraying both surfaces will allow it to slip easily for accurate placement. Squeege out the air and extra solution.

The bottom line is that these door handle protectors are easy to install, are packaged well (other than the weird labeling), and include everything you need except for water and a few drops of dish soap.
To install, clean your handles very thoroughly, spray soapy water on the handles and the adhesive side of the protectors, center them on your handle and use the included tool to squish excess water and bubbles out.
The included tool is only okay for the task as Tesla door handles are typically inset from the door, so the tool can only be moved up-down, not side-to-side, because otherwise all it will touch is the door itself. This isn't a problem in practice, but a smaller tool might be helpful.

My only criticism is that the packaging was re-used from a laptop monitor screen protector, including instructions on the packaging that are not only in Korean, but the Korean translation (see included photo) does not apply to the product. Fortunately, English instructions are included for the door protectors (see photo).
I used only the handle protectors because my car has full PPF (Paint Protection Film), but as you can see from the attached photo of the product on its protective sheet, the area around the handle can be protected as well.
Please note the photo of the old handle protectors that I replaced (see photo with foil around the handles, which I used to protect the car from the heat gun I used to remove them). While a different brand, I suspect these handle protectors will need to be replaced after about 2 years or they may start to look like the photograph. That said, I am happy to do so, because they protect the shiny stainless steel handles from scratches.

This package has everything needed to put the protection film on to the vehicle. The instructions are clear and detailed. For me, the installation took about half an hour for the first handle, but once you get the first one on, the rest should take less time to install. Because your handles are a high traffic area, I consider these a must-have. The film fits perfectly and without bubbles as advertised.

Comes with precisely cut PPF for all the door handles and the necessary equipment to install.
Installation is simple, especially for anyone that has done any sort of PPF or tint installation before. Provides adequate protection around the door handles. I wouldn't say it's the nicest look though but if it's protection that you're after, this fits the bill.

For installation, make sure to follow the instructions and clear the area well to degrease and remove any contaminants. I only used water, but using slightly soapy water will make it easier. When peeling off the sticker, spray the backside so it doesn't stick easily until you place it where you want. Other than that, if you follow the instructions you should have no troubles.

Got to love the Tesla handles, cutting down on wind drag. These protect around that area, as some people wear jewelry that can scratch the paint. These were super simple to put on and everything was included to get them in place. The lighting makes this look a little off, but they are very hard to notice in outdoor lighting.

The package was written in Korean. There was an instruction sheet in English but not well written. I suggest watching the tutorial videos instead. I installed all films in about 20 mins. The piece goes on the handle itself was more difficult to put on, be careful not to stretch it. The rest was easy just take sometime to line up and push out the water. It’s hardly noticeable afterward and protect the door handle area.