Nice protector!
Sizing is correct but not as easy to apply as some screen savers such as those made by Spiggen. Almost impossible to get all the bubbles out probably due to the large surface area that needs to be covered and the matte finish of the iPad. Would be easier if they provided an alignment tray. Also, the provided squeegee scratched the plastic sheet. It is sufficient for now in the protection it provides, but I will keep my eye out for something better down the road. You do get two sheets if you want to try again.
Would have been five stars but the installation instructions and video were different than the product I received. They changed the guide sticker and I ended up ruining the first one. Once on it looks great, no bubbles and a nice matte texture. One star off for the bad instructions and a two pack becoming a one pack effectively.
Very good product and is easy to apply. It is almost invisible :) it is perfect fit on the sides, also around the camera and Smart connector. So Smart connector is fully functional for my keyboard.
It offers light protection and is easy to apply but it’s not pretty. It’s quite difficult to get smooth even with a smoothing tool (which it doesn’t provide) I understand the desire for a matte finish on the back but the material is very thin and I don’t see it doing much to protect other than from finger prints.
Very easy to put on if you take your time and start at the top. Exactly what I was looking for. Great protection without having to use a case. Pro tip. Align the top edges of the screen protector to the iPad and use the card that came with it to slowly push out any air bubbles as you slowly cover the rest of the iPad towards the bottom.
Great product and easy to apply
Note I’ve done these installs numerous times and not my “first rodeo”. At this point I much rather keep my M4 iPadPro “naked” than to go through this terrible install experience with this product. Bubbles are all over the place (just tooooooo many) and will not dry/go away. And the worst part are the smudges under the cover. Also the divider line between top and bottom sheet is showing on the surface and will not go away/dry. Going to return product… so disappointing
I like that these protector covers for my iPad Pro m4 11" are matte. The instructions and cleaning wipe, squeegee, etc. that are included are useful to align it properly, and it's not hard to install. However, the adhesive isn't sticky enough in some places, such as around the camera cutout. I don't care enough to redo it, but if you're a perfectionist, you might want to look for another option that has a more precise cutout for the camera.
Skins, and screen protectors, are some of the most annoying things to install. Thankfully for iPhone and iPad I have alignment tools which I’m able to use.
With this product, and almost any other type of skin I’ve encountered, they’re quite a pain to properly install. Most of the skins I’ve dealt with are quite paper-thin and flimsy, which is the point of the product. This skin is a little bit thicker compared to the competition which makes lining up the product to the device a bit more easy.
In the middle of the skin there’s an adhesive strip to help you align the product with the device and an included squeegee to help with installation and removal of the bubbles. That adhesive strip was my genuine life saver to help me get a perfect line up on the skin.
I absolutely love the way the skin feels on my device. Much more grippy compared to the naked aluminum back and gives me more peace of mind while handling my iPad case-less.
Great
Top Verarbeitung und super Montage
Den fastnade jättelätt men var svår att få rak
Protects perfectly and is easy to install
Good item. Though the guide for installation need improvement.
It is ok! If you install it correctly and your patient with that it will fit nicely, but if you are in a hurry, it will not look nice at all. You'll have a lot of bubble.
These back protectors fit perfectly and were easy to apply with no bubbles. The matte finish looks clean, helps reduce fingerprints, and still lets the original design show through. They add good scratch protection without making the device feel bulky. Having two in the pack is also a nice bonus
Instructions NOT included. But how hard can it be? Not that hard, no. But all instructions are for the front screen, none for the back protector. Beyond that, it went on fine. You have to align it yourself. The transition between the regular finish of the iPad and the apple logo leaves something to be desired. No air bubbles, per se, but doesn't attach/hold the same. Fingerprints are less visible. The fit is fine and the material is thin enough it doesn't disrupt the fit of various cases I have tried. It is a solid 3 out of 5.
Nice at first. But began to peel after about a month and catch on things. Doesn’t maintain adhesive-ness. Also only received one in the package and I thought there were supposed to be two.
One of the easier covers to install, but nearly impossible to get bubbles and creases out.
Superb. About same improvement for under $25 as Apple' matte finish glass
which is only available as a $200 add-on when buying the most expensive M5 iPad pro.
Buena
Easy to install, perfect fit! No bubbles!